Prof. Francis Davis

Associate Professor

Dept: Mechanical Engineering
A 314 Ceasar Building, College of Engineering, KNUST
Send quick mail

Research Areas/Interests

My research area is design and manufacturing and my interests are: design of experiment and modeling; design, analysis, and manufacturing of engineeri...~more

Profile Menu

Publications

    Publications arising out of the Research and Journal in which papers are published

    1. Opoku, R., Obeng, G. Y., Adjei, E. A., Davis, F., & Akuffo, F. O. (2020). Integrated system efficiency in reducing redundancy and promoting residential renewable energy in countries without net-metering: A case study of a SHS in Ghana. Renewable Energy
    2. Owusu, M., Mensah-Darkwa, K., Andrews, A., Davis, F. and Phelan, P., 2020. Effect of transient low-grade solar heat on liquid thermogalvanic cells. Materials Today: Proceedings.
    3. Akangah, P., & Davis, F. (2020). Identifying Factors that Promote Student Learning in Thermodynamics Using Machine Learning Techniques. TECHNOLOGY INTERFACE INTERNATIONAL JOURNAL, 5.
    4. Sekyere, C. K. K., Davis, F., Fiagbe, Y. A. K., & Amoo, R. N. G. (2020). Techno-Economic Assessment of Non-Revenue Water: A Case Study at AER, GWCL. Journal of Water Resource and Protection, 12(6), 480-494.
    5. Sekyere, C. K. K., Adams, F. W., Davis, F., & Forson, F. K. (2020). Mathematical modelling and validation of the thermal buoyancy characteristics of a mixed mode natural convection solar crop dryer with back up heater. Scientific African, e00441
    6. Sekyere, C. K. K., Davis, F., Opoku, R., & Oko, T. S. (2018). Determinants of passenger transport choices in Ghana: evidence from household data. International journal of science and research (Nagpur), 9(1), e20203979-e20203979.
    7. Davis, F., Sackey, M. N., Fanyin-Martin, A., (2018), "Traditional Practices of Automobile Maintenance in Ghana: An Analysis in the Removal of Automobile Engine Thermostat", African Journal of Applied Research, Vol. 4, No. 1 pp. 62-70.
    8. Davis, A. Andrews, M. N. Sackey, S. P. Owusu-Ofori, (2017), "Effects of Varying Friction Coefficient on Rolling Pressure Distribution", Journal of Science and Technology, Vol. 37, No. 2, pp. 85-99.
    9. Davis, F., Sackey, M. N., Fanyin-Martin, A., Amissah, P. K., (2018), "Road Transportation Safety in Ghana: An Assessment of the Variability in Articulated Trailer Design", African Journal of Applied Research, Vol. 4, No. 1 pp. 14-26.
    10. Davis F., Sekyere, C. K. K., Sogah A. T, Owusu-Ofori S. P., (2018), "Modelling and Prediction of the Temperature Spread Variation for Evaluation of Gas Turbine Performance", International Journal of Science and Research, Vol. 7, Issue 1 pp. 1079-1084.
    11. Paul Akangah, Leotis Parrish, Andrea Ofori-Boadu, Francis Davis, (2018). "Predicting Academic Achievement in Fundamentals of Thermodynamics using Supervised Machine Learning Techniques". 2018 ASEE Southeastern Section Conference, Daytona Beach, Florida, USA March 4-6, 2018.
    12. Davis, M. N. Sackey, A. Andrews, S. P. Owusu-Ofori, (2017), "Realistic Friction Coefficient Model between a Rolling Cylindrical Element and a Deformable Flat Surface", Journal of Tribology International, Vol. 109, pp. 252-257.
    13. Sekyere, C. K. K., Davis F., Mensah L. D., Forson F. K., (2017), "Technical Analysis of Jatropha and Palm Kernel Biodiesel as the Sole Fuel Source for Powering Diesel Engine", ARPN Journal of Science and Technology, Vol. 7, No. 1, pp. 8-18.
    14. Sekyere, C. K. K., Adams F. W., Davis F., Forson F. K., (2017), "Experimental Investigation of the Thermal Buoyancy Characteristics of a Mixed Mode Natural Convection Solar Crop Dryer with Back Up Heater", Journal of Energy Technologies Policy, Vol. 7, No. 6, pp. 23 -36.
    15. Davis, P.Y. Andoh, M. N. Sackey, S. P. Owusu-Ofori, (2014), "Assessment of Friction between a Rolling Cylindrical Element and a Deformable Flat Surface", Journal of Science and Technology, Vol. 34, No. 2, pp. 26-34.
    16. Y. Andoh, Y. A. K. Fiagbe, F. Davis, S. Asaana , (2013), "A Mathematical Model to Predict the Quantity of Defective Bottles in an Automated Bottle Washer using Factorial Design Technique", International Journal of Scientific and Technology Research, Vol. 2, No. 10, pp. 56-62
    17. Y. Andoh, F. Davis, Y. A. K. Fiagbe,, T. Alhassan , (2013), "Tyre Pressure Model for Predicting Fuel Consumption of vehicles on Ghana Roads", International Journal of Scientific and Technology Research, Vol. 2, No. 8, pp. 120-124
    18. Y. Andoh, F. Davis, Y. A. K. Fiagbe, (2013), " Monitoring of Carbon Dioxide Production in a Carbonated Beverage Company using Factorial Design Technique", International Journal of Scientific and Technology Research, Vol. 2, No. 10, pp. 13-19.
    19. Andoh, P. Y., Davis, F., Fiagbe, Y. A. K., & Alhassan, (2013). T. Tyre Pressure Model For Predictingfuel Consumptionof Vehicles On Ghana Roads
    20. Y. Andoh, F. Davis, S. P. Owusu-Ofori, (2011), "Prediction of a Delamination Area during Drilling of Carbon Composite Laminates Structure", Journal of Science and Technology, Vol. 31, No. 2, pp. 120-134.
    21. Davis, F. (2010). Effects of Variable Friction Coefficient on the Pressure Distribution Between a Rolling Cylindrical Element and a Deformable Flat Surface.
    22. Y. Andoh, F. Davis, S. P. Owusu-Ofori, (2010), "Development of a Control Strategy for Monitoring the Delaminating Damage in Drilling of Carbon Composite Laminate", Journal of Science and Technology, Vol. 30, No. 3, pp. 143-156.
    23. Davis and P.Y. Andoh, (2007), "Effects of Turning Variables on Acoustic Emission’s Energy Response using Factorial Design Method". 7th College of Engineering Research Retreat (CERR 7), July 24 – 27, 2007, Chances Hotel, Ho, Volta Region, Ghana.
    24. Davis, S. P. Owusu-Ofori, P.Y. Andoh, L. E. Ansong, (2007), "Quasi-Automatic Monitoring System for Turning Operation Using Acoustic Emission Signal Response And Factorial Design Method", Journal of Science and Technology, Vol. 27, No. 3, pp. 107-121.
    25. Y. Andoh, F. Davis, J. Antonio (2007), "Effect of Cutting Parameters on Acoustic Emission Signal Response during Drilling of Laminated Composites", Journal of Science and Technology, Vol. 27, No. 3, pp. 98 -106.
    26. M. Sackey, F. Davis, P. Y. Andoh, S. P. Owusu-Ofori, (2009). "An Overview of Practical Statistical Methods for Evaluating Quality Characteristics". 7th College of Engineering Research Retreat (CERR 7), Koforidua, Eastern Region, Ghana July 21-24, 2009, pp. 177-184.  
    27. P. Owusu-Ofori, F. Davis, P. Y. Andoh, S. M. Sackey, (2009). "Time Series Models for Dynamic Analysis of Product Quality". 7th College of Engineering Research Retreat (CERR 7), Koforidua, Eastern Region, Ghana July 21-24, 2009, pp. 76-83.
    28. Atepor and F. Davis, (2009), "Investigation of Nonlinear behaviour of a flexible Rotor System with Parametric Excitation". 7th College of Engineering Research Retreat (CERR 7), Koforidua, Eastern Region, Ghana July 21-24, 2009, pp. 117-123.
    29. Atepor and F. Davis, (2009), "Dynamical System Analysis from Nonlinear Transition to Chaos for a flexible Rotor System Model". 7th College of Engineering Research Retreat (CERR 7), Koforidua, Eastern Region, Ghana July 21-24, 2009, pp. 106-116.

    OTHERS.

    1. Davis. Effects of Variable Friction Coefficient on Pressure Distribution between a Rolling Cylindrical Elements and a Deformable Flat Surface, PhD. Dissertation, North Carolina Agricultural & Technical State University, Greensboro, 2010.

     

    1. Davis. Monitoring of Turning Variables using Acoustic Emission – Technique M.Phil. Thesis, Kwame Nkrumah University of Science & Technology, Kumasi, 2003.

     

    1. Davis. Design and Construction of an Agro-Processing Drill Jig and Fixture. Bachelor of Science, Mechanical Engineering, Kwame Nkrumah University of Science & Technology, Kumasi, 1998.

     

    1. Davis. Characteristic Study of Kwame Nkrumah University of Science & Technology Machine Shop Boiler, Air Compressor, and Refrigeration Plant – Project Report, Kwame Nkrumah University of Science & Technology, Kumasi, 1994.

     

    CONFERENCES /SEMINARS AND WORKSHOPS ATTENDED

    1. 3rd - 5th November, 2015, World Innovation Summit for Education (WISE) Conference, Doha, Qatar.
    2. 10th – 12th April, 2012, The First KNUST E-Learning Technical Stakeholders’ Collaborative Meeting on Synchronised and Unified Del delivery Strategy for IDL-KNUST, CollinMay Hotel, Ejura, Ashanti Region
    3. 2009 Washington Fulbright Enrichment Seminar, Global Challenges, Local Solutions: Fostering Change through Social Entrepreneurship, Washington, D.C. 2009
    4. 7th College of Engineering Research Retreat (CERR 7), Koforidua, Eastern Region, Ghana, July 21-24, 2009.
    5. 6th College of Engineering Research Retreat (CERR 6), Chances Hotel, Ho, Volta Region, Ghana, July 24 – 27, 2007
    6. The 2007 Annual Conference of the Ghana Institute of Engineers, March 28-31, 2007, Engineers Centre, Roman Ridge, Accra, Ghana.
    7. TALIF Workshop for Senior Members of the College of Engineering, KNUST, 2005
    8. Induction Training Workshop for New Lecturers and Lecturers of 3-Year Standing or Less organized by the Quality Assurance and Planning Units/Human Resource Development Section, KNUST, August 2005 (Topics include: Mandate, Vision, Mission, Core values of the KNUST and expected demands for Quality Assurance; Quality Pedagogy-Trends, Techniques and Technologies; Overview of Use of MCQ for Testing and Grading; Overview of Research Practice: Research Grant Writing, Library Use and Research, Project Execution and Publications Preparation; Competencies in Tutorship and Mentorship)
    9. Workshop on Multiple Choice Questions (MCQs) Testing and Grading organized by the College of Engineering, KNUST, 2005.
    10. International Partnership on Aerospace Education and Research. Organized by the College of Engineering, KNUST, Kumasi, 2005
    11. Joint Training Workshop for Science, Technical and Mathematics Teachers (STM) organized by Ghana Education Service, Central Regional Directorate, 2001

     

     

Related Profiles

Print page

SEND QUICK MAIL TO STAFF

Subject

Message

Your Email Address:
Note: this is to help the staff contact you back.