Prof. Samuel Kwofie

Dept: Materials Engineering
Send quick mail

Research Areas/Interests

Profile Menu

Publications

    1. Richard Opoku, George Yaw Obeng, Jo Darkwa, Sanuel Kwofie, Minimizing heat transmission loads and improving energy efficiency of building emvelopes in Saharan Africa using bio-based composites materials, March 2020, DOI:10.1016/j.sciaf.2020.e00358
    2. Kwofie, and MingLiang Zhu, Modeling R-dependence of Near-threshold fatigue crack growth by combining crack closure and exponential mean stress model, Int. J. Fatigue (2019), 122, 93-105.
    3. Frank Ofori Agyemang, Gracita, M. Tomboe, Samuel Kwofie, Hern Kim, Electrospun carbon nanotubes coated polyaniline composites with improved electrochemical properties for super capacitors, Electrochinica Acta 259, (2018)1110-1119
    4. Solomon Asante-Okyere, Tang Daqing, Emmanuel Enemuoh, and Samuel Kwofie, Life Cycle Assessment of Supercritical Coal Power Plant with Carbon Capture and Sequestration in China, Asian Journal of Environment & Ecology1(2): 1-8, 2016; Article no.AJEE.31400
    5. E.P. Klenam, C. Polese, L.H Chown, S. Kwofie and L.A Cornish, Mechanical Behaviour of Pack Carburized AISI 316L austenitic stainless steel, Journal of the. Southern African Institute of Mining and Metallurgy, Vol. 115. Dec. 2015, 1183-1191
    6. J. A. Y. Sogbey, S. Kwofie, E.O. Darko, A. A. Adjaottor, N. Allotey, C. P. K. mafDagadu, Comparative Structural Strength Analysis of Pozzolana Portland Cement Using Ultrasonic Nondestructive Testing Technique, e-Journal of Science & Technology (e-JST) (5), 9, 2014, 125 -136
    7. Kwofie, S., Relaxation of Residual Stress under Fatigue Load described in terms of Cyclic-Plastic Deformation Model, Journal of Structural Damage and Health Monitoring, SDHM, 8, no.4, (2012), 295-305
    8. Kwofie, S. and Rahbar, N.(2012), A Fatigue Driving Stress Approach to Damage and Life Prediction under Variable Amplitude Loading, International Journal of Damage Mechanics, DOI: 10.1177/1056789512449638
    9. Enemouh, E.U., and S., Design with Sustainability Analysis: Case study of Renewable Bicycle Frame, ASEE North MidWest Conference Proceedings, University of Minnesota, Duluth, October 13-15, 2011.
    10. Enemouh, E.U., and Kwofie, S., Integrating Study Abroad Experience with Teaching Sustainability Course in Africa, ASEE North MidWest Conference Proceedings, University of Minnesota, Duluth, October 13-15, 2011.
    11. Gyansah, L and Kwofie, S.(2012) The effect of notched designs on the Performance of Bamboo, Research Journal of Environmental and Earth Sciences, 4(1): 8-15, 2012
    12. Tan, T., Rahbar, N., Allameh, SM., Kwofie, S.,  Dissmore, D., K. Ghavami, and Soboyejo, W.O., (2011), Mechanical Properties of Functionally Graded Hierarchical Bamboo Structures, Acta Biomaterialia
    13. Kwofie, S., Description and Simulation of cyclic stress-strain response during residual stress relaxation under cyclic load, Procedia Engineering 10 (2011) 293–298
    14. Gyansah, L and Kwofie, S.(2011) Investigation into the Performance of Bamboo Using the Notched and the Un-Notched Specimen, Research Journal of Applied Sciences, Engineering and Technology 3(4): 245-251, ISSN: 2040-7467
    15. Kwofie, S and Rahbar, N. (2011), An equivalent driving force model for prediction of crack growth under different stress ratios, J. Fatigue, 33, pp.1199–1204
    16. Kwofie, S. and Andrews, A.(2011), The quality of locally-manufactured corn-mill grinding plates, Journal of Science and Technology, 31, No.1, pp152-159
    17. Andrews, A and Kwofie, S. (2010), “Corrosion of cast iron mill plates in wet grinding” LEJPT, Issue 17, pp. 97-108
    18. Kwofie, S., Plasticity model for simulation, description and evaluation of vibration stress relief, Materials Science and Engineering A516, Issue 1-2, August (2009), pp. 154-161
    19. Kwofie, S., and Chandler H. D, Fatigue life prediction under conditions where cyclic creep–fatigue interaction occurs, International Journal of Fatigue, Volume 29, Issue 12, December 2007, Pages 2117-2124
    20. Kwofie, S., Cyclic creep of copper due to axial cyclic and tensile mean stresses
      Materials Science and Engineering: A, Volume 427, Issues 1-2, 15 July 2006, Pages 263-267
    21. Kwofie, S. Cyclic creep of copper due to axial cyclic and tensile mean stresses, Materials Science and Engineering: A, Volume 392, Issues 1-2, 15 February 2005, Pages 23-30
    22. Kwofie, S and Chandler, HD, Potential health hazard of Locally manufactured corn-mill grinding plate, Journal of the University of Science and Technology (JUST), Vol.26, No.2, (2006), pg.137-147
    23. Chandler, HD and Kwofie, S., A description of cyclic creep under conditions of axial cyclic and mean stresses, Int. Fatigue, Vol. 27, No.5, (2005), pg. 541-545.
    24. Kwofie, S., Cyclic creep behaviour of copper described in terms of one-parameter kinetic model, Materials Science & Engineering A392, (2005), pg. 23-30.
    25. Kwofie, S., Erratum to “Cyclic Creep behaviour described in terms of a one-parameter Kinetic model” [Mater. Sci. Eng. A392(1-2)(2005), 23-30], Material Science & Engineering A404, Sept.(2005), pp333
    26. Kwofie, S., Equivalent stress approach to predicting the effect of stress ratio on fatigue threshold stress intensity range, J. Fatigue, Vol. 26, No. 3, (2004) pp.299-303
    27. Kwofie, S., Cyclic hysteresis behaviour described in terms of one-parameter model, Materials Science & Engineering A357 (2003) pg.86-93
    28. Kwofie, S., and Chandler, H.D., Low-cycle fatigue under tensile mean stresses where cyclic life extension occurs, J. Fatigue, 23, (2001) pp.341-345.
    29. Kwofie, S., An exponential stress function for predicting fatigue strength and life due to mean stresses, J. Fatigue, Vol. 29, No. 9, (2001), pp. 829-836

Related Profiles

Print page

SEND QUICK MAIL TO STAFF

Subject

Message

Your Email Address:
Note: this is to help the staff contact you back.